Factory Supply CZ105 Direct Auto Diesel Engine Parts Sparks Glow Plug 12mm

500.0 pieces
MOQ
Factory Supply CZ105 Direct Auto Diesel Engine Parts Sparks Glow Plug 12mm
풍모 갤러리 제품 설명 따옴표를 요구하십시오
풍모
제품 사양
OE NO.: 36710-2F000
Warranty: 2 Years
Car Model: For HYUNDAI
Model Number: CZ105
Type: Glow Plug
Glow Plug Type: Pencil-Type Glow Plug
Voltage: 7V
Spanner Size: 12mm
Thread Size: M10*1
Fitting Depth: 28mm
Cone Pitch: 63
Port Type: M4
Connector Type: 4 mm
기본 정보
Model Number: For HYUNDAI, CZ105
결제 및 배송 조건
Packaging Details: 1.netural packing: one piece into a polybag,50pcs into a three layers of leather box 2.color packing: we can make as your design box if the quality meet 5000pcs. 3.Our brand box: BOLIN box--one piece into a polybag,10 pieces into middle box.
Supply Ability: 400000 Piece/Pieces per Month
제품 설명
Product Description
Specification
Products Details 
Glow Plug
Rated Voltage
7V
Thread Size
M10*1
Cone Pitch
63
Spanner Size
12
Port Type 
M4
Fitting Depth 
22 mm
Length
120 mm
Company Profile
Our Advantages
Certifications
Packing & Delivery
Packing Details:
One Piece Into A Polybag,50pcs Into A Three Layers Of Leather Box.
Color Packing:
We Can Make As Your Design Box If The Quality Meet 5000pcs.
Our Brand Box:
Bolin Box--One Piece Into A Polybag,10 Pieces Into Middle Box.
FAQ
Maintenance And Replacement When Replacing Glow Plugs, Special Attention Must Be Paid To The Followings Aspects:
●Leave to cool the engine; ●Make sure that the key for the starting of the engine is on off position; ●Dirt around the hole for the plug must not fall into the combustion chamber under any circumstances; glow plugs must be removed by using special plug box wrench; ●Glow plugs must be ftted by using special plug box wrench and tightened, if possible, by using a torque wrench; ●The power connection nuts for the electric connection of the glow plug, must be tightened to the correct torque. Otherwise,the glow plug may be damaged by excessive torque. This can result in irreparable damage to the plug (connecting stud shear or overheating due to closed annular gap);

Removing The Glow Plug
●remove the power connection nuts by using a plug box wrench (7mm or 8mm); by using a brush, clean the hollow around the glow plug without removing it; remove the glow plug with a plug box wrench (the key can vary from 3/8 to 21mm,according to the nut of the glow plug);

Glow Plug Installation
Recommended Torque Specification For BOLIN Glow Plugs:
Use the correct wrench for the Glow Plug When changing glow plugs, make sure that oil, dirt etc. on the outside of the disassembled glow plug does not enter into the cylinder. When mounting the glow plug, clean the engine side of the flange and make sure the glow plug is correctly inline with the thread of the cylinderhead. Make sure the plug is correctly positioned and tighten it by hand until it cannot be tightened any further. Then, use a torque wrench to tighten it accurately to the torque showed in the chart below.

Contact Us
You are very welcomed to contact us at any time.We will demonstrate our best efforts to serve you and provide you the best quality products with the best designed package. Click"Send"get the Latest quotation Now!!
추천된 제품
우리와 연락하기
담당자 : Joyce Wang
남은 문자(20/3000)